Rev 3.6 G-Converter Chassis TECHNICAL:SALES:FAX:ADDRESS:WEB:(0118) 965 6000 (0118) 965 5100 (0118) 965 5001 464 Basingstok
10 G-Converter Chassis SALES: 0118 965 5100 Installation Before installation, refer to the safety warnings, approvals requirements and emc requireme
11 G-Converter ChassisTECHNICAL: 0118 931 2233 Management – Overview This manual deals with the set-up configurations specific to the Card Cage asse
12 G-Converter Chassis SALES: 0118 965 5100 Supervisor Port (terminal management) This RS232 option is presented on a female 9 Way-D connector. It
13 G-Converter ChassisTECHNICAL: 0118 931 2233 General set-up Display Layout There are three main areas on the Supervisor set-up screen used to chan
14 G-Converter Chassis SALES: 0118 965 5100 General Keyboard Conventions Only a few keys are required to configure the chassis and are summarised as
15 G-Converter ChassisTECHNICAL: 0118 931 2233 Abandoning Changes Pressing ESC at any point before a configuration is updated will cause the messag
16 G-Converter Chassis SALES: 0118 965 5100 10 Base-T Port (Telnet Management) This method uses the 10 Base-T RJ45 (Ethernet) port. When a Telnet c
17 G-Converter ChassisTECHNICAL: 0118 931 2233 Supervisor Terminal Requirements The terminal should be configured as follows: 8 bits per character,
18 G-Converter Chassis SALES: 0118 965 5100 General set-up Display Layout There are three main areas on the Supervisor set-up screen used to change
19 G-Converter ChassisTECHNICAL: 0118 931 2233 General Keyboard Conventions Only a few keys are required to configure the chassis and are summarised
2 G-Converter Chassis SALES: 0118 965 5100 How To Contact your Local Black Box Italy: Australia: Black Box Italia S.P.A Black Box Ca
20 G-Converter Chassis SALES: 0118 965 5100 Abandoning Changes Pressing ESC at any point before a configuration is updated will cause the message “
21 G-Converter ChassisTECHNICAL: 0118 931 2233 Inbound CR Specify CR > CR, LF translation on input stream. Outbound CR Specify CR > CR, L
22 G-Converter Chassis SALES: 0118 965 5100 IP Screen The IP page displays the IP Statistics for the unit. The TX statistics are on the left, RX
23 G-Converter ChassisTECHNICAL: 0118 931 2233 Alarms Screen The Alarms page shows the current alarms status of the chassis, not the individual C Th
24 G-Converter Chassis SALES: 0118 965 5100 Events Screen The information given is event number, time and date and a text string detailing the nat
25 G-Converter ChassisTECHNICAL: 0118 931 2233 SNMP Management To enable SNMP or Telnet management, information must be added to the Manager Card vi
26 G-Converter Chassis SALES: 0118 965 5100 Supervisor Terminal Emulation The Manager Card supports several terminal emulations. When connection is
27 G-Converter ChassisTECHNICAL: 0118 931 2233 Typical Configuration Display Figure 5
28 G-Converter Chassis SALES: 0118 965 5100 General Keyboard Conventions Only a few keys are required to configure the chassis and are summarised as
29 G-Converter ChassisTECHNICAL: 0118 931 2233 Abandoning Changes Pressing ESC at any point before a configuration is updated will cause the messag
3 G-Converter ChassisTECHNICAL: 0118 931 2233 France: U.S.A Black Box Catalogue Black Box Corporation Tel: 0145606700 Tel: 724-7
30 G-Converter Chassis SALES: 0118 965 5100 Diagnostics For diagnostics of the Channel Cards see the relevant Data Channel Card manual. Manager Car
31 G-Converter ChassisTECHNICAL: 0118 931 2233 Appendix A- Warnings WARNING: This unit is a Class one product and thus relies on the protective ear
32 G-Converter Chassis SALES: 0118 965 5100 Mains accessibility WARNING: The mains socket outlet must be installed near the equipment and must be e
33 G-Converter ChassisTECHNICAL: 0118 931 2233 Appendix B –Approval Requirements The G-Converter System carrying the BABT/CE168 assessment symbols a
34 G-Converter Chassis SALES: 0118 965 5100 Appendix C - EMC Requirements To ensure compliance with the EMC directive, some care must be taken to en
35 G-Converter ChassisTECHNICAL: 0118 931 2233 Supervisor Port Connections Description Type At Connector DCE – 9-Way D-Type Female Socket DCD Out
4 G-Converter Chassis SALES: 0118 965 5100 Contents Introduction...
5 G-Converter ChassisTECHNICAL: 0118 931 2233 Ethernet Screen...
6 G-Converter Chassis SALES: 0118 965 5100 G-Converter System’s Chassis User Manual WARNING - BEFORE INSTALLATION, PLEASE REFER TO SAFETY INST
7 G-Converter ChassisTECHNICAL: 0118 931 2233 Introduction This manual provides information covering installation and set-up procedures of the G-Con
8 G-Converter Chassis SALES: 0118 965 5100 Manager Card The Manager Card is a single section card that plugs into Slot 19 of the Card Cage System.
9 G-Converter ChassisTECHNICAL: 0118 931 2233 The Nx64 Channel Cards are universal and may be operated with/or without a Manager Card. Rotary switc
Comments to this Manuals