Black Box ISU2011-8-UK Specifications

BRI-Hub TECHNICAL:SALES:FAX:ADDRESS:WEB:(0118) 965 6000 (0118) 965 5100 (0118) 965 5001 464 Basingstoke Road, Reading, Berkshire R

10 BRI-Hub SALES: 0118 965 5100 Connecting the Hub 6V DCCE The DC connector of the power adapter is inserted into the jack on the left side of th

11 BRI-HubTECHNICAL: 0118 931 2233 The TE-ports termination resistors are permanently active and cannot be switched off. Please install terminati

12 BRI-Hub SALES: 0118 965 5100 Configuration for power fail communication with the BRI-Hub If cable connections between the BRI-Hub and the t

13 BRI-HubTECHNICAL: 0118 931 2233 Termination Resistors The signal pairs must be terminated with 100Ω resistors at both ends of the bus. These mus

14 BRI-Hub SALES: 0118 965 5100 Operation No service is needed during operation. Cable shorts at one TE port only affect the power feeding voltage

15 BRI-HubTECHNICAL: 0118 931 2233 Troubleshooting Fault Problem How to clear the problem Pwr-LED is off BRI-Hub is powered off Plug in power ad

16 BRI-Hub SALES: 0118 965 5100 Notes

2 BRI-Hub SALES: 0118 965 5100 How To Contact your Local Black Box Italy: Australia: Black Box Italia S.P.A Black Box Catalog Austr

3 BRI-HubTECHNICAL: 0118 931 2233 Contents Introduction...

4 BRI-Hub SALES: 0118 965 5100 Introduction Within the data communications and LAN industry it is well known that a structured cabling concept using

5 BRI-HubTECHNICAL: 0118 931 2233 If a BRI needs to be made available in several rooms, it used to be necessary to install a bus from the server r

6 BRI-Hub SALES: 0118 965 5100 Technical Specifications SO Interface BRI Number of interfaces……………………………………5 for BRI-Hub-4, 9 for BRI-Hub -8 Type

7 BRI-HubTECHNICAL: 0118 931 2233 Environmental and Safety Notes The device conforms to all european and international standards for safety, environ

8 BRI-Hub SALES: 0118 965 5100 Installation For proper operation the device must be placed in a suitable location. It should be a clean and dry env

9 BRI-HubTECHNICAL: 0118 931 2233 • The screws must be put into the holes of the BRI-Hub. The screws slide approximately 25 mm into the case. •