Black Box LGB1005A-R2 Technical Information Page 77
- Page / 311
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
21
3-3-4. Ports
Function name:
VLAN Port Configuration
Function description:
In VLAN Tag Rule Setting, user can input VID number to each port. The range
of VID number is from 1 to 4094. User also can choose ingress filtering rules
to each port. There are two ingress filtering rules which can be applied to the
switch. The Ingress Filtering Rule 1 is “forward only packets with VID matching
this port’s configured VID”. The Ingress Filtering Rule 2 is “drop untagged
frame”. You can also select the Role of each port as Access, Trunk, or Hybrid.
Parameter description:
Port 1-24:
Port number.
VLAN Aware:
Based on IEEE 802.1Q VLAN tag to forward packet
Ingress Filtering:
Discard other VLAN group packets, only forward this port joined VLAN
group packets
Frame Type:
All: Forward all tagged and untagged packets
Tagged: Forward tagged packets only and discard untagged packets
PVID:
This PVID range will be 1-4094. Before you set a number x as PVID, you
have to create a Tag-based VLAN with VID x. For example, if port x
receives an untagged packet, the switch will apply the PVID (assume as
VID y) of port x to tag this packet, the packet then will be forwarded as
the tagged packet with VID y.
Role:
This is an egress rule of the port. Here you can choose Access, Trunk or
Hybrid. Trunk means the outgoing packets must carry VLAN tag header.
Access means the outgoing packets carry no VLAN tag header. If
packets have double VLAN tags, one will be dropped and the other will
still be left. As to Hybrid, it is similar to Trunk, and both of them will tag-
out. When the port is set to Hybrid, its packets will be untagged out if the
VID of the outgoing packets with tag is the same as the one in the field of
Untag VID of this port.
Untag VID:
Valid range is 1~4094. It works only when Role is set to Hybrid.
- L2 Plus Managed Switch 3
- Table of Contents 5
- Revision History 8
- Caution 9
- Electronic Emission Notices 9
- About this user’s manual 10
- 1. Introduction 11
- Key Features in the Device 12
- 1-2. Checklist 14
- 1-3. Features 14
- LED Color Function 17
- 2. Installation 19
- Fig. 2-2 21
- Table 2-3 28
- Ethernet LAN 29
- 2-1-5. IP Address Assignment 30
- 1 0000000 32
- 1 1111111 32
- Fig. 2-12 34
- 2-2. Typical Applications 35
- 3. Operation of 37
- Web-based Management 37
- Fig. 3-1 38
- Fig. 3-2 39
- 3-1-1. System Information 42
- Fig. 3-4 43
- 3-1-2. Account Configuration 44
- 3-1-3. Time Configuration 45
- Fig. 3-6 47
- 3-1-4. IP Configuration 48
- 3-1-5. Loop Detection 51
- 3-1-6. Management Policy 52
- Fig. 3-9 53
- Fig. 3-10 53
- 3-1-7. Virtual Stack 55
- Desc: 58
- 3-2-1. Port Configuration 60
- 3-2-2.Port Status 62
- Fig. 3-14 63
- 3-2-3. Simple Counter 65
- Auto-refresh: 66
- 3-2-4. Detail Counter 67
- “Clear” button 70
- 3-3. VLAN 71
- 3-3-2. Tag-based Group 72
- 3-3-3. Port-based Group 75
- Fig. 3-23 76
- 3-3-4. Ports 77
- Fig. 3-24 78
- 3-3-5. Management 79
- 3-4. MAC 80
- Fig. 3-26 81
- 3-4-2. Static Filter 82
- 3-4-3. Static Forward 83
- 3-4-4. MAC Alias 84
- 3-4-5. MAC Table 85
- 3-5. GVRP 86
- Fig. 3-31 88
- 3-5-2. Counter 89
- 3-5-3. Group 91
- 3-6-1. Ports 92
- Fig. 3-34 93
- 3-6-2. Qos Control List 94
- Fig. 3-42 97
- 3-6-3.Rate Limiters 100
- 3-6-4.Storm Control 102
- 3-6-5.Wizard 103
- Set up Port Policies Finish 105
- Fig. 3-51 106
- 3-7. SNMP Configuration 113
- 3-8. ACL 115
- Fig. 3-64 116
- 3-8-2.Rate Limiters 117
- 3-8-3.Access Control List 118
- Ingress Port 119
- Fig. 3-69 Frame Type 120
- Fig. 3-70 121
- Fig. 3-118 Rate Limiter 135
- Fig. 3-119 Port Copy 135
- 3-8-4.Wizard 147
- Set up Port Policies 149
- Fig. 3-138 153
- 3-9. IP MAC Binding 156
- 3-10. 802.1X Configuration 158
- MAC Enable 159
- Port Authorize 159
- Fig. 3-54 160
- Table 3-3 162
- 3-10-1.Server 163
- ForceUnauthorized: 165
- ForceAuthorized: 165
- 3-10-3.Status 167
- Fig. 3-145 802.1X Status 168
- 3-10-4. Statistics 169
- 3-11. Trunking Configuration 170
- 3-11-1.Port 172
- 173
- Fig.3-147 Trunk Port Setting 173
- 3-11-2 Aggregator View 174
- 3-11-3 ACP System Priority 175
- 3-12 STP Configuration 176
- Fig. 3-150 STP Status 177
- 3-12-2. Configuration 178
- 3-13-1 Status 183
- 3-13-2 Region Config 184
- Fig. 3-156 185
- Fig. 3-157 185
- Fig. 3-158 185
- Fig. 3-159 185
- Fig. 3-160 185
- Fig. 3-156 Edit MSTI / Vlan 186
- Fig. 3-157 Instance Config 187
- Fig. 3-158 Port Config 188
- Fig. 3-159 Instance Status 189
- Fig. 3-160 Port Status 191
- 3-14. Mirror 193
- 3-15. IGMP Snooping 195
- 3-15-2 Group Membership 197
- Fig.3-61 198
- 3-16-1 Events 199
- 3-17-1. DHCP Snooping State 201
- 3-17-2. DHCP Snooping Entry 202
- 3-17-3. DHCP Snooping Client 203
- 3-18. Configuration 204
- 3-18-1. Factory Defaults 205
- 3-18-2 . Save Start 205
- 3-18-3 . Save User 205
- 3-18-4 . Restore User 206
- 3-19. Config File 207
- 3-20. Diagnostics 208
- 3-20-2 .Ping 209
- 3-20-2 .VeriPHY 210
- 3-21 Maintenance 211
- 3-22 Logout 212
- 4. Operation of CLI 213
- Management 213
- LGB1005A-R2 214
- 4-2. Commands of CLI 215
- 802.1X 222
- account 227
- alarm 233
- autologout 238
- config-file 239
- firmware 239
- hostname 244
- ip_mac_binding 248
- loop-detection 249
- <<alias>> 251
- <<mac-table>> 253
- <<maintenance>> 254
- <<static-mac>> 257
- mirror 259
- per port restricted role 265
- policy 270
- <<ports>> 280
- <<qcl>> 281
- <<rate>> 283
- reboot 285
- <<disable>> 286
- <<enable>> 286
- <<set>> 286
- system 293
- traplog 294
- trunk 297
- 5. Maintenance 306
- Appendix A 307
- Technical Specifications 307
- Hardware Specifications 308
- Appendix B 311
- Null Modem Cable 311
- Specifications 311
© 2020, manymanuals.com. All rights reserved. | 0.749 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals