Black Box AC470A User Manual download pdf (Page 16)

Accessories and Spare Parts

for REINHARDT-Test Fixtures

REINHARDT System- und Messelectronic GmbH

Bergstr. 33 D-86911 Diessen-Obermühlhausen Tel. 08196/934100 + 7001, Fax 08196/7005 + 1414

E-Mail: [email protected] http://www.reinhardt-testsystem.de

WireWrap-wire MTZ 30-130, 1,000 m reel

Test Fixture Wire Finder TFWF 96 for individual xture wiring, in case you have to duplicate

a xturing or want to use already existing test point designations for the RMX-measuring matrix

channels. In this case you have to wire the contact pins to certain RMX-channels and wire both

ends of the wrap-connection to the correct positions: The cable of a RMX-measuring matrix wir-

ing is touched with the search probe and the respective RMX-channel is shown on the display.

For that you connect the TFWF 96 Test Fixture Wire Finder to the connector of the rst RMX-

measuring matrix and then touch any wire end with the search probe. The resp. channel is shown

on the display and you only connect the wire with the respective contact pin.

Short Finder Probe SFP 37

Inductive short nder for localising faults on loaded PCBs, incl. 3.7 V Li-Ion accu with up to

1,000 mAh for up to 7 hours use, connection clips and charger

AAE-CNC 2 Semi-automatic Fixture Production System:

CNC-drilling center (desk-top unit, travel x: 395 mm, y: 300 mm, usable placing area x: 395 mm,

y: 244 mm; drilling machine, hard- and software for controlling the CNC-machine, device for

automatic picking and placing of the receptacles and spring contact pins, drill, clamping de-

vice for the bed-of-nails plate/exchange plate of the xture), security switch, wiring, magazine

(100 mil crown, 100 mil tip and 75 mil tip) for 625 receptacles incl. spring contact pins, dust hood,

suction device (without vacuum-cleaner).

For building xtures you need the software for taking over Gerber data.

Underframe for AAE-CNC 2 Semi-automatic Fixture Production System incl. 4 bases

adjustable in height, about 770 mm wide, 835 mm deep, 805 mm high

Vacuum cleaner for AAE-CNC 21 Fixture Production System Operating voltage: 230 V,

50 Hz

IE & OE Specications subject to change without prior notice !

12/2014

1 2 ... 11 12 13 14 15 16

No comments

Black Box AC470A User Manual Page 16