Black Box AC2000A Specifications download pdf (Page 12)

Model AC2000A

3.2 RS-232

The AC2000A-S can be controlled via a serial device. From the serial port,

you have full control over the operation of the front-panel buttons plus

many more capabilities. Terminal emulator or ASCII software is required.

An example is Microsoft Windows HyperTerminal (generally found in

the START->Programs->Accessories->Communication folder)

Note on RS-232 port availability on your PC

Most PCs and notebooks do not have a serial port. So to program

the Switch you may need a USB to RS-232 Serial converter.

These are available from Black Box.

3.2.1 Configure HyperTerminal

- Connect direct to COM1, COM2, or any available COM port

- 4800 Baud, 8 bits, No Parity, 1 Stop bit, No flow control

- Settings per following figures:

To enter into the serial command mode after connecting this unit to

the PC; the following text must be sent along with a carriage return

(ENTER).

BlackBox

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

No comments

Black Box AC2000A Specifications Page 12