Black Box SC120A-R2 User Manual download pdf (Page 37)

2 X 2 SCSI MATRIX SWITCH

5.11.2 A

PCONCFG

TILITY

The apconcfg.exe utility is used to configure the TCP/IP address. This utility is

provided on the included CD-ROM. You can reconfigure the IP address by using

the IP Configuration Utility. Run apconcfg.exe from the CD-ROM provided with

your 2 x 2 SCSI Matrix Switch. A “Configure Network Switch” window will appear.

Enter the new IP address and switch MAC address in the appropriate fields. The

MAC address can be found on a label located on the bottom of the switch. You can

search for the IP address by clicking the search button in the “Configure Network

Switch.” This will bring up a “Search for Network Switches” window. Enter a

beginning IP address, an ending IP address, and click Search.

Command strings to control the SCSI Switch may be manually entered through

certain versions of HyperTerminal to support connections to IP addresses through

the LAN.

NOTE

You will need to specify port #3001 when establishing the connection.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 52 53

No comments

Black Box SC120A-R2 User Manual Page 37