Black Box ServSwitch Wizard Specifications download pdf (Page 27)

CHAPTER 4: Configuration

4. Configuration

To configure your ServSwitch Wizard system, you’ll need to configure first the

attached PCs, as directed in Section 4.1, then the Wizard itself, as directed in the

rest of this chapter.

IMPORTANT NOTE

Throughout the rest of this manual, the [Enter] designation refers to the

main “enter” or “carriage-return” key (often labeled “

↵

”) on the main

section of the keyboard. Do not use the “Enter” key on the numeric

keypad or the extra “Enter” key found on the main section of some

specialized keyboards.

4.1 Configuring Your PCs

Configure your PCs in the same way that you would if your keyboard, mouse, and

monitor were all connected directly to your PCs. Keep in mind that the ServSwitch

Wizard emulates Microsoft compatible serial, IntelliMouse, and PS/2 mice; so

you’ll need to make sure that your PC software is configured for a Microsoft mouse

of the correct type. Refer to the list of supported drivers in Section 3.1.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

No comments

Black Box ServSwitch Wizard Specifications Page 27