Black Box ACU3009A Specifications download pdf (Page 39)

SERVSWITCH™ BRAND CAT5 KVM MICRO EXTENDER

6.2.5.B Attaching a Switch with Single Composite CPU-Port Connectors

Run a CPU Cable designed for the KVM switch—refer to Sections 4.2.4.B and

4.2.4.C for product codes—from one of the switch’s CPU-port connectors to the

user-port connectors of the Remote Unit or Dual-Access Local Unit, as shown in

Figure 6-7 on the next page. (For the regular ServSwitch and the other switches

listed in Section 4.2.4.B, the Extender’s included KVM-extension cable will work

for this purpose if you haven’t already used it to attach a CPU or switch to the

Local Unit’s CPU port.)

NOTES

If the switch is a ServSwitch Multi, keep these things in mind as you

match the serial and audio cables/strands:

– The proper DB9 serial connector to use on its User Cable is the

one without a yellow band.

– The audio cable from the Extender Unit’s “Out” connector should

be plugged into the blue-banded audio connector on the User Cable.

– The audio cable from the Extender Unit’s “In” connector should be

plugged into the audio connector without a blue band on the User

Cable.

Also bear in mind that the microphone strand of the ServSwitch

Multi User Cable (the one with the blue-banded connector) is mono only,

so any stereo information that passes through this strand will be lost.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 61 62

No comments

Black Box ACU3009A Specifications Page 39