Black Box 5000 Series Installation Guide

1 Verizon Networkfleet 5000 PRODUCT LINE INSTALLATION GUIDE 5500 Diagnostic Hardware (Light/Medium/Heavy Duty) | 5200 Non-Diagnostic Hardware

10 Heavy Duty Harness Installation Connecting to the Diagnostic Link Connector (DLC) Port 1. With the vehicle’s engine OFF, unscrew the DLC por

11 Universal Harness Installation Note: Please ensure that the Driver Door is OPEN during the ENTIRE installation process. Black Wire (one pair)

12 Quick Install Harness Installation 1. Open box. Make sure all necessary components are inside for proper install. Harnesses are shipped sepa

13 Verifying Successful Installation 1. Start the vehicle’s engine. All lights (Red, Yellow, and Green) on the device should turn on solid for 1

14 Creating Tamper Evidence Once the vehicle harness is plugged in, slide the Networkfleet branded yellow zip ties through the two slots provided

15 Completing Installation Before securing the device under the dashboard, make sure that you have recorded the VIN, hardware serial number and o

16 Securing the Device Use zip ties to fasten the hardware securely to a stable bracket or wire bundle under the dash. IMPORTANT: The device mus

17 Window-Mount GPS Antenna 1. Units are shipped with a knock-out panel covering the sensor/serial ports. First, use an X-ACTO knife to slice of

18 Sensor The 5500 and 5200 devices include a sensor port for monitoring various voltage events occurring within the vehicle such as: PTO engage

19 To Install 1. Units are shipped with a knock-out panel covering the sensor/serial ports. First, use an X-ACTO knife to slice off 2 of the 3 ta

2 Table of Contents Getting Started Registration Form ...

20 Garmin® Networkfleet is ONLY compatible with Garmin devices that support Fleet Management Interface Version 2.6 and higher. The list of compa

21 Bluetooth Expansion Module The Bluetooth Expansion Module (BTE) provides Bluetooth connectivity between 5500 devices and the J. J. KellerTM com

22 Port Expansion Module (PEM) Note: To enable PEM functionality, the 5000 series device may need an over-the-air firmware update. Customer Care

23 Quake Satellite Modem Note: Installation must be performed in a known good cellular coverage area. The preferred installation method and place

24 Verifying Successful Installation/LED Behavior To verify successful installation, call Customer Care at 866.227.7323 and select Option 5. LE

25 Pelican Micro Case Note: The Pelican Micro Case is compatible with the Networkfleet 5200 device and the Universal Harness. Installing the 52

26 Appendix: Troubleshooting Light Indicators Issue: Red light continues to blink rapidly Solution: • Verify that the unit is not surrounded by

27 Frequently Asked Questions Q: Are the 5000 series harnesses interchangeable between all other Networkfleet product lines? A: No. Q: When i

28 Contacting Networkfleet If you have any additional questions, you may contact Networkfleet Customer Care: Toll Free Number: 866.227.7323 Fax

3 Registration Form Fill out the enclosed registration form before completing installation. Record the following information: Vehicle Ident

4 5000 Product Line Unit Overview Note: All 5500 and 5200 units are shipped with a knock-out panel covering the sensor/serial ports. In or

5 Harness Options for the 5000 Product Line Prior to installation, you must select and order the appropriate harness for your vehicle type. The L

6 Heavy Duty Harnesses There are 3 different harness options for Heavy Duty vehicle installations: 6-pin Harness, 9-pin Harness, and 9-pin “D” Har

7 Light/Medium Duty OBD-II Harness Installation Select an Adapter that most resembles the shape of the OBD-II port of the vehicle. Use these guid

8 Light/Medium Duty OBD-II Harness Installation Core Connector Assembly 1. Snap the selected plastic adapter to the back of the Core Connector

9 Light/Medium Duty OBD-II Harness Installation Connecting to the OBD-II Port 1. With the vehicle’s engine OFF, remove the vehicle’s OBD-II