Black Box SC120A-R2 User Manual download pdf (Page 36)

CHAPTER 5: Configuration and Operation

5.11 Network Control of SCSI Switch

The 2 x 2 SCSI Matrix Switch may be controlled over a TCP/IP network through

its LAN port.

5.11.1 LAN-P

ORT

ONFIGURATION

You can remotely control the SCSI Switch through a standard 10-Mbps Ethernet

connection running TCP/IP. In the SCSI Switch’s factory-default setting, the LAN

port will be enabled and the RS-232 COM2 port (which shares the same circuitry

and is most often used for daisychaining SCSI Switches) will be disabled. If you

want to daisychain SCSI Switches, you will need to disable the LAN port and enable

the COM2 port. To do this, scroll through the control menus in the switch’s front-

panel LCD (see Section 4.3) until you reach the SET SERIAL PORTS menu. Move

the cursor to the DAISY CHAIN option and press ENTER on the switch’s keypad to

change the setting from N to Y.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 52 53

No comments

Black Box SC120A-R2 User Manual Page 36