Black-box 5000 User Manual download pdf (Page 158)

Multiserver 5000

156

Table 11-7. Status/Statistics (continued)

Option Description

8. Channel Statistics Channel Statistics are part of the System Statistics (see option 7 above). When this

option is chosen, the current channel statistics for the node are displayed. Voice

channels and integral devices are not displayed with this menu.

Select this option and the following prompt appears:

ENTER NODE-ID (^X TO ABORT):

Enter the node ID. Press <cr>. A demand report of the Channel Statistics is displayed.

The current percentage of system buffers used by each channel is displayed.

If a buffer overflow occurred, ** is displayed (in a period report only) for the channel

most likely to have caused the buffer overflow. For a period report, this displays the

maximum percentage of system buffers used by the channel since the last reporting

interval. If no reporting interval is set, the statistics are reset every 60 minutes.

9. Switch Statistics Switch Statistics are part of the System Statistics (see option 7 above). When this

option is chosen, the following are displayed: Each class number, the class name, the

number of connects, connect failures, and the number of channels that have been in

queue since the last period. All 64 classes will be displayed, whether or not they are

configured. You can return to the Status/Statistics menu at any time just by pressing

The Switch Statistics display is part of the System Statistics periodic and demand

reports. Switch Statistics Reporting is option 5 of the Command Facility Parameters

menu. It must be set to ON for the Switch Statistics to appear as part of the Systems

Statistics reports. See Section 11-3, Configuring the Command Facility, and

Table 11-3 for more information.

10. PROM ID Displays the PROM set number of the CommPak cartridge. The last character in the

number is the revision level.

11. Voice/Fax This option displays up-to-the-minute voice/fax statistics accumulated since midnight.

Daily Statistics The statistics are maintained for 24 hours. At midnight all statistics from the previous 24

hours are cleared and a new 24-hour cycle is started. See the MS1 Voice/Fax Card

User’s Manual for more information.

12. NETMan Status Displays a current status of the optional network management system (if installed).

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 267 268

No comments

Black-box 5000 User Manual Page 158