Black Box KV3000 User Manual download pdf (Page 19)

SERVSWITCH™ AND SERVSWITCH ULTRA™

2.4 The Rear Panel

All cable connections are made at the rear panel of the ServSwitch, as

illustrated in Figure 2-4 and described below.

Figure 2-4. The rear panel of a 16 to 1 ServSwitch (KV3x16F).

Panel Label Connector Description

Connect the sharing computers to these

ports with “CPU Adapter Cables.” At the

ServSwitch end these cables have a DB25

male connector; at the other ends, they

have appropriate connectors to plug into

your CPUs’ video, keyboard, and mouse

ports. These cables take the signals that

would normally pass between the CPUs’

ports and the monitor, keyboard, and

mouse, and carry them between the CPUs’

ports and the Switch instead.

You could also connect “submaster” Serv

type switches to these ports using

“ServSwitch to ServSwitch Expansion

Cables.” These cables have DB25 male

connectors at both ends; at the submaster

end, they should be plugged into a

MONITOR/KEYBOARD/MOUSE port.

Refer to Sections 2.5 and 3.2.4.

DB25 FCPU N

[N = a number

from 1 to either 2,

4, 8, 12, or 16,

depending on

which model you

have]

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 120 121

No comments

Black Box KV3000 User Manual Page 19