Black Box KV3000 User Manual download pdf (Page 49)

SERVSWITCH™ AND SERVSWITCH ULTRA™

KEYBOARD/MOUSE port (this will require an MKM Adapter Cable), and

select the port as if the submaster were a single unit. Then issue the Set

Keyboard Mode and Keep Settings commands as described in the previous

paragraphs. Unplug the keyboard and reconnect the submaster to the master

Serv unit. The port’s keyboard mode should now be properly configured.

If most or all of the CPUs you’ll be connecting to your ServSwitch system

use a keyboard mode other than 2 and a mouse type other than

PS/2, you

might want to change the defaults of the attached CPU

ports at installation

time. This is because when power outages occur, the

CPU

ports will return to

their default keyboard mode when the power comes back on. (The same

thing applies to the shared keyboard and mouse; if they are other than

factory-default type, you will probably want to change the defaults at

installation time.)

Table 4-5. Keyboard-Mode and Mouse-Interface Codes

Code Affects Selects

1 CPU IBM PC keyboard mode 1

2 CPU IBM PC keyboard mode 2

3 CPU IBM PC keyboard mode 3

4 CPU Apple keyboard and mouse

5 CPU Sun keyboard and mouse

6 CPU PS/2 mouse

7 CPU 2-button Microsoft serial mouse

9 CPU 3-button PC Mouse (Mouse Systems) serial mouse

20 Global 101/102-key PC shared keyboard

21 Global 104/105-key (Win 95/Win 98) PC shared keyboard

30 Global PS/2 or PS/2 shared mouse

31 Global 2-button Microsoft serial shared mouse

32 Global

3-button PC Mouse (Mouse Systems) serial shared mouse

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 120 121

No comments

Black Box KV3000 User Manual Page 49