Black Box KV3000 User Manual download pdf (Page 85)

SERVSWITCH™ AND SERVSWITCH ULTRA™

5.5 The “Computer Select Window”

You can bring up a “computer select window” on the shared monitor’s screen to

select a specific computer from a list of computers attached to the ServSwitch

Ultra. Access the window, shown in Figure 5-10 below, by pressing and releasing

the left [Ctrl] key and then hitting the [Esc] (escape) key. The arrow in the

column after the computer number points to the currently selected computer.

Figure 5-10. The “computer select window.”

Just as it does with the configuration menus and computer labels, the ServSwitch

Ultra overlays the “computer select window” on top of your current video. Use the

up- and down-arrow keys on the shared keyboard to select the desired computer;

when it is highlighted, hit [Enter] to immediately switch to that computer (its label

will be shown). If you have more than 16 computers in your ServSwitch Ultra

system, use the [PageUp] and [PageDown] keys to access the other computers, at

up to 16 computers per window. Hit [Esc] to exit the window and remove it from

the screen.

Use the “Configure overlay” page to set the position and color of the

window (see Section 5.4.2). The height of the window will vary depending on

the current “maximum computers” (maximum ports) setting. For instance, if

maximum computers is set to 6, the window will have slots for only

6 computer names.

Computer select window

1>Computer 1

2 Computer 2

3 Computer 3

4 Computer 4

5 Computer 5

6 Computer 6

7 Computer 7

8 Computer 8

Computer 1

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 120 121

No comments

Black Box KV3000 User Manual Page 85