Black Box KV3000 User Manual Page 45

  • Download
  • Add to my manuals
  • Print
  • Page
    / 121
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 44
44
SERVSWITCH™ AND SERVSWITCH ULTRA™
4.3.7.A Keyboard Types (IBM Type Keyboard Only)
At the time of this writing, there are two basic types of keyboards most commonly
used with IBM PS/2 and PC/AT compatible computers. The older type, standard
for several years, has either 101 or 102 keys depending on which country and
language it was designed for. The newer type, originally developed by Microsoft, is
designed for use with machines running Windows 95 or Windows 98; it has three
additional Windows specific keys (the left and right Start keys and the App
[application] key), for a total of 104 or 105 keys.
The newer 104/105-key keyboard is now the default shared-keyboard setting for
the ServSwitch. Send a Set Keyboard/Mouse command to change the shared-
keyboard type if you are using a 101/102-key type shared keyboard, or if you have
been using a 101/102-key keyboard and are swapping it out for a 104/105-key
keyboard. (If you have a Sun or Apple keyboard attached to the ServSwitch and
you send it a Set Keyboard/Mouse command that attempts to change the shared-
keyboard type, the command will be ignored.)
4.3.7.B Mouse Types (IBM Type Mouse Only)
IBM compatible CPUs can use several types of mice as well. The ServSwitch
supports three of these (on both its input and output sides): PS/2 (including PS/2
wheel), Microsoft serial, and PC Mouse (Mouse Systems).
PS/2 mice have a 6-pin mini-DIN connector; their interface is similar to that of
the PS/2 keyboard. The advantage of the PS/2 mouse is that its I/O circuitry is
built onto the CPU’s motherboard and doesn’t occupy any of the CPU’s serial
ports. PS/2 mice come in two varieties: an older style that has only buttons, and a
newer “wheel mouse” style—developed by Microsoft and introduced with its
IntelliMouse™—that has a clickable wheel (instead of a center button) between its
left and right buttons; you can use this wheel to scroll through menus (among
other things). PS/2 is the factory-default shared-mouse setting for the ServSwitch.
Serial mice all use the TIA RS-232 serial standard, implemented on either a
DB25 or a DB9 connector, and communicate with the PC at a data rate of
1200 bps. There are two common serial-mouse types: Microsoft serial mice use a
3-byte/7-bit protocol; unlike the other two types of mice you can choose from, they
do not support a third button. PC Mouse (also known as Mouse Systems) serial
mice use a 5-byte/8-bit protocol; many lower-cost mice have a switch that you can
set for either Microsoft compatible operation or PC Mouse compatible operation.
The Switch will always autodetect the presence of a PS/2 mouse (with or without
the wheel), and it will autodetect if you change from a PS/2 mouse to a Microsoft
serial mouse. Send a Set Keyboard/Mouse command to change the Switch’s
shared-mouse type setting if you are using a PC Mouse serial mouse, or if you
Page view 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 120 121

Comments to this Manuals

No comments