Black-box 5000 User Manual download pdf (Page 134)

Multiserver 5000

132

Table 11-1. Reset Options

Option Description

1. Node Disconnects the Command Facility and resets the local Multiserver node, all locally

connected channels, and locally attached feeder muxes. Remote Multiservers and feeder

muxes will not be reset by this option. If a port has been configured as sync or reconfigured

from sync to async, or a different clocking rate has been configured, this reset is required

prior to channel configuration. After you select this option, the screen will display the

following:

ENTER A “Y” TO CONFIRM OR “N” TO ABORT:

To terminate and halt the reset process, press N and the screen will return to the Reset

Menu. To continue with the reset, press Y. This takes you to the Node Menu. The Node

Menu has two options for node reset: factory-default values (cold reset) or current

configuration (warm reset). WARNING: A cold reset (factory-default values) will erase all

non-default configurations for the entire node.

2. Link Clears all information on the link and will disconnect all ports currently using the link. If the

link is a mux link, the feeder mux will also be reset. Force-connected channels will

automatically reestablish connection. After you select this option, the screen will display the

following:

ENTER LINK CHANNEL # (^X TO ABORT):

Enter the channel (port) number for the link being reset, then press <cr>. To terminate

without resetting the link, press ^X.

3. Channel Disconnects and resets a single data or voice/fax channel only. This option permits a reset

function without having to take down the whole system. After you select this option, the

screen will display the following:

ENTER CHANNEL # (^X TO ABORT):

Enter the channel number, then press <cr>. To terminate without resetting the channel,

press ^X.

4. Integral LAN Resets the integral LAN module (LAN Bridge) to either the current configuration or its

default settings. After you select this option, the screen will display the following:

ENTER MODULE LOCATION (B-E) (^X TO ABORT):

Enter the module location for the LAN module, then press <cr>. The Integral LAN Reset

Menu will appear. To terminate without resetting the LAN module, press ^X.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 267 268

No comments

Black-box 5000 User Manual Page 134