Black-box 5000 User Manual download pdf (Page 176)

Multiserver 5000

174

Display voice/fax signal. The indicator

lights on the voice/fax module show

the level (see Figure 13.5). When

this test is initiated, the display will

read [Active].

Terminate Terminates all the tests initiated at

Test this menu.

Once a test is initiated, an [Active] message is

displayed on the LCD. All tests remain active until

terminated with Terminate Test. The next time you

cycle through the LCD Menus, an [Active]

message is displayed, meaning the test was

previously invoked and is still active. When a test is

complete or is terminated, the LCD will display

[Inactive].

For additional information on these tests, consult

the MS1 Voice/Fax Card User’s Manual.

NTEGRAL DEVICES

When this menu is selected, the screen will prompt

for the channel number to be tested. If a

CSU/DSU module is installed in the Multiserver,

the following diagnostic options will be offerred:

Option Description

Local Verifies the integrity of data entered

Loopback into the local ISU.

Digital Verifies the data path of the system

Loopback from a terminal at the remote unit,

and verifies the data path from a

local terminal up to the ISU module.

This test requires operator

intervention at the remote unit. The

Multiservers at both ends of the link

must be in the Remote Composite

Loopback Test to perform this test

(see above).

Test Pattern Generates a test pattern within the

(TP) ISU to verify the ability of the ISU

and the DDS to transfer data in both

directions. This requires operator

intervention at the remote unit.

Local Verifies the local ISU module by

Loopback using a test pattern generated

with TP within the ISU module.

Terminate Terminates all the tests initiated at

Test this menu.

Once a test is initiated, an [Active] message is

displayed on the LCD. All tests remain active until

terminated with Terminate Test. The next time you

cycle through the LCD Menus, an [Active]

message is displayed, meaning the test was

previously invoked and is still active. When a test is

complete or is terminated, the LCD will display

[Inactive].

For additional information on these tests, consult

the MS1 56K CSU/DSU Module User’s Manual.

13.7 Configuration

Currently the only option in this menu that can be

accessed is Hardware Overview. This function is a

display only of the hardware configuration.

Press the down arrow to read the PROM # and

right/left arrows to display the module information.

The display shows the following items in this order:

PROM #

Slot $: NMS Module (if installed)

Slot A: Module and Revision

Slot B: Module and Revision

Slot C: Module and Revision

Slot D: Module and Revision

Slot E: Module and Revision

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 267 268

Comments to this Manuals

No comments

Black-box 5000 User Manual Page 176

Comments to this Manuals