Black-box 5000 User Manual download pdf (Page 173)

CHAPTER 13: LCD/Keypad

171

Press

Key Resulting Display

The node number appears in the brackets. (The

number shown above in the brackets is the default

node number.) The cursor will be in the farthest

numeric position to the right. Configure the node

number using the keypad as explained below:

If you choose a number that is too large (for

example, 712), an Out of range message will

display. Depress any key to continue. If the

number you choose is already in use on the

network, the following message will display:

Number already in use. Depress any key.

The node number appears in the brackets. (The

number shown above in the brackets is the default

node number.) The cursor will be in the farthest

numeric position to the right.

Important

The alphanumeric sequence starts

with a space, then 0 to 9, A to Z, and

an underscore (_).

Do not configure a space as part of

the node name; if you do, this error

message will appear:

Invalid name character/s.

The space can be used to delete

existing characters in columns that

will be blank. (For example, if the

!240 node ID becomes NY, the last

two columns must be blank.)

Configure the node number using the keypad as

explained below:

If the name you choose is already in use on the

network, the following message will appear:

Name already in use. Depress any key.

After configuring the new node name, press the

EXEcute key. The following will display:

Are you sure? EXE forces a RESET.

Press the EXEcute key again and the Multiserver

will reset.

Important

You must accept the LCD/Keypad reset.

Do not reset from the Command Facility

or your new node ID will be lost.

13.6 Diagnostics

The Diagnostic Menu offers diagnostic tests for the

following: System , Voice/Fax, and Integral

Devices.

NOTE: When the desired test appears on the LCD,

press the EXEcute key to activate the test.

SYSTEM

Node name: [!240]

EXE

Move cursor one column to the left

Do not use

Increment character by one (if key is held,

the character will increment rapidly)

Move cursor one column to the right

Accepts the new node name

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 267 268

Comments to this Manuals

No comments