Black-box 5000 User Manual download pdf (Page 228)

Multiserver 5000

226

INCOMPATIBLE Info You are trying to connect a mux link to the

LINK TYPES port configured as an interconnect link or vice versa.

INCORRECT CHANNEL Info The port selected for the test desired is

TYPE of the wrong type or an attempt has been made to

broadcast to one of the following:

• A link port

• An out of service (OOS) port

• A voice port

INHIBITED Info The feeder mux connected to the Multiserver

Command Facility tried to activate a remote

composite loopback on the link.

INPUT REQUIRED Info A <cr> without a data entry was received for a

function which requires a data input, such as

entering a channel number, or a new password.

INPUT TEST ACTIVE Diagnostic An async output test has been activated.

INTEGRAL DEVICE NOT Info No integral device has been installed in the

INSTALLED module location you specified.

INVALID DATA Info One of three possibilities has occurred:

• The remote Multiserver node ID was entered

for a channel statistics request

• There was an attempt to enable/disable a link

• A remote node ID was entered for port

configuration.

INVALID DESTINATION Info You have attempted to force-connect to an

STRING unknown node.

INVALID ENTRY Info • A port other than A1 or A2 was entered when a

request was made for status or configuration of

an integral device.

• You have attempted to duplicate a class name

which has already been defined.

INVALID NUMBER Info • In configuring a voice or fax extension number,

you have entered fewer than the required

number of digits.

• The prompt requires a numeric input.

ISU DIGITAL LOOPBACK Diagnostic The ISU on link ci has been placed in digital

ACTIVE LINK # ci loopback.

Screen Display Messages

Message Message Type Explanation

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 267 268

No comments

Black-box 5000 User Manual Page 228